⚙ Full Product Lineup
Sea-Doo Switch Accessories
Every no-drill, bolt-on accessory Upgrade Machine Works makes for the Sea-Doo Switch — trolling motor mounts, downriggers, rail HardPoints, and more. All precision CNC machined in the USA.
What accessories are available for the Sea-Doo Switch?
UMW builds four core Sea-Doo Switch accessories — a trolling motor mount (SwitchBlade), a downrigger mount, a shaft support bracket, and a rail HardPoint mounting system purpose-built for the Switch's unique handrail shape — plus supporting add-ons (a HardPoint accessory adapter, a graph mount kit, and SwitchBlade replacement hardware) and bundles that combine the core four at a discount. Every product bolts directly to the Switch's factory rail system with no drilling required.
SwitchBlade Trolling Motor Mount
From $529.95
The flagship mount — bolts to the bow rail with no drilling, works with Minn Kota, Garmin Force, Motor Guide, and Haswing bow-mount motors via a motor-specific quick-release bracket.
View Product
Downrigger Mount
From $109.95
No-drill aluminum bracket for mounting a downrigger to the Switch rail — built for trolling deeper water without modifying the boat.
View Product
Trolling Motor Shaft Support Bracket
From $69.95
Billet aluminum mounting point for a RAM Mounts Tough-Claw shaft stabilizer arm (sold separately) — reduces shaft flex on longer trolling motor shafts. Bolts on its own, no SwitchBlade required, and works with other RAM-compatible mounts if you get creative.
View Product
Rail HardPoint System
From $130.00
Purpose-built to fit the Sea-Doo Switch's unique handrail shape — ten threaded attachment points open up nearly limitless accessory mounting options: rod holders, phone mounts, cameras, graph mounts, and more via Scotty, TKI, or other compatible adapters.
View Product
These pair with the four core accessories above — HardPoint customization and SwitchBlade replacement parts.
HardPoint Add-On
HardPoint Accessory Adapter
From $34.95
Bolts to your HardPoint's mounting surface to add a Scotty Powerlock or TKI 144 attachment point — one of several ways to customize your HardPoint for the accessory you need.
View Product
HardPoint Add-On
Graph Mount Kit
From $434.95
HardPoint + TKI arm combo built to hold a fish finder / graph display exactly where you want it, fully bolt-on.
View Product
Switchblade Replacement Hardware
From $24.99
Lost a bolt or clamp piece? Replacement hardware kit for the SwitchBlade mount — no need to buy a whole new unit.
View Product
Combine accessories at a lower price than buying each piece separately.
Bundle Pricing
SwitchBlade + Shaft Support Bundle
From $584.90
SwitchBlade mount + shaft support bracket together — the most common pairing. A RAM Mounts Tough-Claw stabilizer arm (sold separately) completes the no-flex setup.
View Bundle
Bundle Pricing
SwitchBlade + Downrigger + Shaft Support Bundle
From $779.80
SwitchBlade + shaft support bracket + two downrigger mounts in one order. RAM stabilizer arm and Cannon downrigger bases sold separately. Not compatible with Switch Fish, 2026 Switch Sport, or 2026 Switch Cruise/Cruise Limited.
View Bundle
Bundle Pricing
SwitchBlade + Downrigger + Shaft Support + Graph Mount Bundle
From $1,164.75
Adds a HardPoint graph mount kit to the Downrigger Bundle above — SwitchBlade, downrigger mounts, and shaft support bracket together. Fish finder, RAM stabilizer arm, and Cannon downrigger bases sold separately. Same boat-model restrictions apply.
View Bundle
Long shaft feels wobbly
Add the
Shaft Support Bracket plus a RAM Mounts Tough-Claw stabilizer arm (sold separately, see gear below) — or get the bracket bundled with the SwitchBlade + Shaft Support Bundle.
Want to troll deeper water
Mounting a fish finder or rod holder
Start with a
Rail HardPoint — it creates a customizable no-drill mounting surface on the Switch's rail — then add the accessory-specific adapter — the
Graph Mount Kit bundles this for fish finders.
UMW builds the mounts — here's the gear our customers pair them with most.
ℹ️
Affiliate disclosure: The links below are Amazon affiliate links. If you purchase through one, Upgrade Machine Works may earn a small commission at no extra cost to you. As an Amazon Associate, UMW earns from qualifying purchases. We link only products we've actually seen paired with our mounts.
Trolling Motors — Pairs With SwitchBlade
Minn Kota Terrova
Our editor's pick — Spot-Lock GPS anchor, massive dealer network, works great on all three Switch sizes.
Check Price on Amazon
Haswing Cayman
Best budget pick — quick-release bracket included in the box, GPS anchor at a fraction of the cost.
Check Price on Amazon
Minn Kota Powerdrive
Best value — same Minn Kota reliability as the Terrova, lower price, shares the same brackets.
Check Price on Amazon
Garmin Force Kraken (24V)
Best if your Switch already runs Garmin ECHOMAP electronics — one screen controls both. 24V only.
Check Price on Amazon
Full comparison, bracket part numbers, and thrust-limit details in our trolling motor buyer's guide.
Shaft Stabilizer Clamps — Pairs With Shaft Support Bracket
RAM Tough-Claw Small (RAP-400-202U)
Clamps 0.625"–1.14" shafts. Fits most motors — Minn Kota Terrova, Powerdrive, Motor Guide, Haswing Cayman.
Check Price on Amazon
RAM Tough-Claw Large (RAP-404-202U)
Clamps 1"–1.6" shafts. Required for the Garmin Force Kraken and Minn Kota Terrova Quest.
Check Price on Amazon
Pairs with the Shaft Support Bracket — not sure which clamp you need? Get the small one unless you're running a Kraken or Terrova Quest.
Rod Holders — No-Drill via HardPoint Accessory Adapter
Scotty #230-BK Power Lock Rod Holder w/ 241 Mount
The complete industry-standard Scotty Powerlock system — rod holder and base included. Our HardPoint Accessory Adapter gives the Scotty base an M6-threaded, no-drill home on your Switch rail, so the whole Scotty setup bolts on without a single hole drilled.
Check Price on Amazon
Pair with the HardPoint Accessory Adapter (Scotty Powerlock pattern) and a Rail HardPoint for a complete no-drill rod holder setup. UMW is not affiliated with Scotty Industries.
Do any of these accessories require drilling into my Sea-Doo Switch?
No. Every UMW accessory bolts directly to the Switch's existing factory rail system — no drilling, no permanent modification.
Can I combine multiple accessories on one boat?
Yes — most Switch owners run several at once (for example, SwitchBlade + Shaft Support + a HardPoint for a fish finder). Each mounts to its own point on the rail, so they don't interfere with each other.
Do these accessories fit my specific Switch model and year?
What's the difference between buying separately and buying a bundle?
Bundles combine commonly-paired accessories (like the mount and the shaft support bracket) at a lower total price than buying each individually — same parts, one box, one shipment.
Are these accessories made in the USA?
Yes. Every UMW accessory is precision CNC machined in-house in Billings, Montana.
All prices current as of publish date and subject to change. See individual product pages for full specs and current pricing.
